Wisycom RPU500 High-Power Full-Duplex Reporter Portable Unit

Stock on Backorder

Call for pricing

SKU: WIS-RPU500

Category:

Brand: Wisycom

Key features:

  • Easily portable compact reporter unit
  • 5 or more hours battery lifetime with the standard battery
  • High visibility transflective display
  • 4 programmable buttons for remote audio routing

Product Details

Wisycom RPU500 High-Power Full-Duplex Reporter Portable Unit

The Wisycom RPU500 is a portable, full-duplex unit designed specifically for reportage applications. Its versatile transmitter operates in both VHF and UHF bands and utilises digitally generated modulation (narrowband/wideband).

Key Features:

  • Ultra-Wideband VHF & UHF Operation:
    • Main TX (Broadband): VHF 170-230 MHz; UHF 440-696 MHz; UHF 714-744 MHz; USA 940-960 MHz; Japan 160/460 MHz (optional)
    • Talk-back RX (Narrowband): UHF (438-638 MHz or 470-670 MHz) (Note: Minimum TX/RX separation required)
  • High Transmitter Power: Up to 1W output.
  • Extended Battery Life: >5 hours with the RRC2040 battery pack.
  • Flexible Control: USB-C/Bluetooth connectivity for Wisycom Manager software control.
  • Dual Audio Outputs: 3.5mm waterproof jacks (e.g., journalist/guest).
  • Main Audio Input: XLR balanced with 48V/12V phantom power.
  • Aux Audio Input: Shared 3.5mm waterproof jack (mixed with MAIN input for simultaneous recording/live commentary).
  • External Power: 4-pin Hirose connector for DC power.
  • Programmable Buttons: 4 buttons for talk-back with remote audio routing (via AUX or Ethernet with Ember+).
  • High-Visibility Display: Transflective colour display, readable in sunlight.
  • Compact and Ergonomic Design: Portable and easy to handle.
TRANSMITTER – RF
Frequency ranges from 170 to 960 MHz, depends on the variants
NOTE: When TX works in UHF, install the filter AFTxxx and set the transmitter’s frequency about 40 MHz above than receivers frequency ex. TX freq. ≥530 MHz and RX: 470-490 MHz
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user customisable
Frequencies 5 kHz step
Frequency error < ± 2.5 ppm, in the rated temperature range
RF Power switchable Low / Medium / High, typ. 100mW / 300mW / 1W
(*) note: in some countries high power can be disabled, for local norm!
Antenna connector TNC type female (BNC for T1/F1 version)
RF impedance 50 ohm
Modulation FM mono, wideband or narrowband IFB (SW selectable)
Nominal deviation ±40 kHz (wideband), ± 25 kHz (narrowband)
Peak deviation ±56 kHz (wideband), ± 35 kHz (narrowband)
Spurious emissions < 2 nW (typical = 0.1 pW)
RECEIVER – RF
Frequency ranges from 414,5 to 670 MHz, depends on the variants
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user customisable
Frequencies 5 kHz step (default), other on request
options: RS2 = 6.25 kHz, RS3 = 10 kHz, RS4 = 12.5 kHz, RS5 = 20 kHz, RS6 = 25 kHz, RS7 = 125 kHz
Frequency error < ± 2.5 ppm, in the rated temperature range
Antenna connector BNC type female, 50 ohm
Modulation FM intercom and IFB (SW selectable)
Peak deviation ± 35 kHz (IFB narrowband), ± 8,5 kHz (Talkback 50Khz), ± 4 kHz (Talkback 12,5Khz)

 

AUDIO
Noise Reduction system ENS – Wisycom Extended-Sound Optimised (other on request)
AF bandwidth for TX 50 Hz – 20 KHz (1dB) (Wideband, ARM based, SW switchable)
50 Hz – 15 KHz (1dB) (Narrowband, ARM based, SW switchable)
AF bandwidth for RX SW switchable (other on request):
ENS-NB: 40 Hz ÷ 15 KHz (1dB) (IFB Narrowband 110KHz channel spacing)
COM-ENS-50K: 300 Hz ÷ 6 KHz (1dB) (Talkback 50Khz channel spacing)
COM-ENS-12K5: 300 Hz ÷ 3 KHz (1dB) (Talkback 12,5Khz channel spacing)
Audio input connector 1 x XLR3-F type (MIC/Line level) for audio input
1 x Jack 3.5mm AUX for audio input/output (sw selectable)
1 x Jack 3.5mm for audio output
Managing interface USB C, Bluetooth 5
Command buttons • Pgm • Talkback 1 • Talkback 2 • Talkback 3
Display Transflective colour display with high visibility in the sun
Power supply standard battery pack RRC2040 or External = 10 – 18 Vdc (10W max) with Hirose 4-pin connector
OTHERS
Power consumption TRANSMITTER:
440mA @12V / 5.28W in VHF range
450 ÷ 530 mA @12V in UHF range
depending of the frequency and temperature (display off, 1 Watt)
RECEIVER:
70 mA @12V / 0.84W
Battery life > 5h (power profile & IIP3 trade off) with Lithium RRC2040
Temperature range -10 – +55 °C
Dimensions 114mm x 118mm x 55mm (H x W x D) with beltclip
Weight 800g (battery included)

RPU500 User Manual

RPU500 Brochure

Frequently Bought Together

  • Wisycom

    WSYC08

    Wisycom AWB950 Whip Antenna UHF

    Wideband end-fed folded dipole antenna.

    7 Unit(s) In stock

    £32.27

  • Wisycom

    WIS-LBP500

    Wisycom LBP500 Lithium-ion Battery

    The Wisycom LBP500 Battery for RPU500/BCA54 is a RCC2040 battery pack for the RPU500 and BCA54.

    4 Unit(s) In stock

    £93.61

  • Wisycom

    24735456

    Wisycom MRK980 Two Channels Ultrawide Band Receiver

    The Wisycom MRK980 Two Channels Ultrawide Band Receiver offers exceptional flexibility and performance for wireless microphone systems.

    Stock on Backorder

    Call for pricing

  • Wisycom

    WIS-MTH610

    Wisycom MTH610 Handheld Transmitter

    The Wisycom MTH610 Handheld Transmitter is specifically designed for professional wireless microphone applications.

    2 Unit(s) In stock

    Call for pricing

  • Wisycom

    WIS-MTP60S

    Wisycom MTP60 Double Battery Beltpack Transmitter

    The Wisycom MTP60 Double Battery Beltpack Transmitter is an exceptionally small and lightweight pocket transmitter with a built-in recorder, ideal for professional wireless microphone applications.

    1 Unit(s) In stock

    £1,750.17