Shure SLXD4Q+ Quad Channel Wireless Receiver

Stock on Backorder

£2,499.60 (£2,083.00 ex VAT)

SKU: SHR-SLXD4Q+

Category:

Brand: Shure

Key features:

  • Four channels in one rack space
  • Transparent 24-bit digital audio with 118 dB dynamic range
  • Available with Dante audio connectivity or standard XLR and 1/4"

Product Details

Shure SLXD4Q+ Quad Channel Wireless Receiver

The Shure SLXD4Q+ Quad Channel Wireless Receiver unlocks a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike, delivering wireless excellence in a space-saving format, wherever required. Wide-tuning SLXD+ transmitters and receivers stay in sync courtesy of a dedicated ShowLink® Ease control link. Manage interference, scan for new channels and automatically update for clear transmission. Also, monitor and configure via a paired mobile device.

Two options are available:

  • SLXD4Q+: Standard XLR + 1/4″ Connectivity
  • SLXD4QDAN+: Dante Audio Connectivity

Key Features:

  • Four channels in one rack space
  • Transparent 24-bit digital audio with 118 dB dynamic range
  • Rock solid RF with 138 MHz wide-tuning range for greater geographical coverage:
    • Up to 11 simultaneous systems in 6 MHz TV bands
    • Up to 14 simultaneous systems in 8 MHz TV bands
  • Automatic Setup – once linked, SLX-D+ receivers and transmitters stay connected, despite any RF interference
  • With ShowLink® Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including:
    • Changing the transmitter frequency once an open frequency is identified
    • Adjust power output level
    • Lock and unlock transmitter controls
    • Transmitter firmware updates
  • Monitor RF status and control receiver and transmitter parameters with Wireless Workbench desktop software, or remotely with the WWB Mobile app over Wi-Fi or Bluetooth
  • Patented Shure Digital Feedback Reducer software is embedded in every SLX-D+ receiver to automatically reduce unwanted audio feedback, should it ever occur
  • Each SLX-D+ component and system ships with AES-256 Encryption installed, for complete and secure peace of mind
  • Audio Summing matches receiver output to available mixer channels (4,3,2 or 1)
  • 4 XLR and 4 1/4″ outputs and 2 local ethernet connections
  • RF Cascade creates an 12-channel system by linking three SLXD4Q+ together, no other accessories required
  • Bias Voltage power supply management
  • Digital predictive switching diversity
  • Rugged metal construction
  • Dimensions (H × W × D): 1.65 x 15.47 x 5.98 in. (42 x 393 x 152 mm)
  • Weight: 1750 g without antennas
  • Housing: Galvanized Steel
  • Power Requirements: 15 V @ 0.9 A

RF INPUT

  • Spurious Rejection: >75 dB Typical
  • Connector Type: BNC
  • Impedance 50 Ω
  • Bias Voltage: 15 V DC, 150 mA maximum, per antenna switchable on-off

AUDIO OUTPUT

  • Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
  • Gain Adjustment Range –18 to +42 dB in 1 dB steps
  • Configuration: 1/4″ (6.35 mm)
    • Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
    • XLR: Balanced (1=ground, 2=audio +, 3=audio –)
  • Impedance: 1/4″ (6.35 mm): 1.1 kΩ (550 Ω Unbalanced)
    • XLR (line): 500 Ω (250 Ω Unbalanced)
    • XLR (mic): 150 Ω
  • Full Scale Output: 1/4″ (6.35 mm): +12 dBV Unbalanced (+18 dBV Balanced)
    • XLR (LINE setting): +18 dBV
    • XLR (MIC setting): –12 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: 1/4″ (6.35 mm): Yes
    • XLR: Yes

CASCADE OUTPUT

  • Connector Type: BNC
    • Note: For connection of one additional receiver in the same band
  • Configuration: Unbalanced
  • Impedance: 50Ω
  • Insertion Gain: 0-2 dB, typical

NETWORKING

  • Network Interface: Single Port Ethernet 10/100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100 m (328 ft)
DANTE VERSION
  • Dimensions (H × W × D): 1.65 x 15.47 x 5.98 in. (42 x 393 x 152 mm)
  • Weight: 1750 g without antennas
  • Housing: Galvanized Steel
  • Power Requirements: 15 VDC @ 1.03 A

RF INPUT

  • Spurious Rejection: >75 dB Typical
  • Connector Type: BNC
  • Impedance 50 Ω
  • Bias Voltage: 15 V DC, 150 mA maximum, per antenna switchable on-off

AUDIO OUTPUT

  • Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
  • Gain Adjustment Range –18 to +42 dB in 1 dB steps
  • Configuration: 1/4″ (6.35 mm)
    • Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
    • XLR: Balanced (1=ground, 2=audio +, 3=audio –)
  • Impedance: 1/4″ (6.35 mm): 1.1 kΩ (550 Ω Unbalanced)
    • XLR (line): 500 Ω (250 Ω Unbalanced)
    • XLR (mic): 150 Ω
  • Full Scale Output: 1/4″ (6.35 mm): +12 dBV Unbalanced (+18 dBV Balanced)
    • XLR (LINE setting): +18 dBV
    • XLR (MIC setting): –12 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: 1/4″ (6.35 mm): Yes
    • XLR: Yes

CASCADE OUTPUT

  • Connector Type: BNC
    • Note: For connection of one additional receiver in the same band
  • Configuration: Unbalanced
  • Impedance: 50Ω
  • Insertion Gain: 0-2 dB, typical

NETWORKING

  • Network Interface: Single Port Ethernet 10/100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100 m (328 ft)

Introducing the Shure SLX-D+ Wireless Microphone System

SLXD+ Spec Sheet

SLXD4Q+ User Guide