Wisycom MPR52 ENG KIT

Description
DELIVERY/RETURNS*
MPR52 Kit Technical Data
MPR52 Downloads
Reviews

Wisycom MPR52 ENG KIT

The Wisycom MPR52 ENG KIT features the new beltpack MPR52 wide band receiver and the option of the new Intermod free 2 x MTP40S or 2 x MTP41S Transmitters.

From August 2020 MPR52 kits will include MTP41S or MTP40S with the following features:

Switchable Wideband and Narrowband
Linear mode – phase cancelling configuration for intermodulation free operation
Ultrasound Protection
Colour – Black

MPR52 ENG Receiver:

The new Wisycom MPR52 Dual Channel Ultrawide Band Receiver is a two channel diversity receiver with up to 790 MHz bandwidth in 470/1260 MHz range and DSP Analogue & Digital Audio Outputs (AES3).

Features:

Two channels diversity receiver
DSP Analogue & Digital Audio Output (AES3)
Up to 790 MHz bandwidth in 470/1260 MHz range
Next Gen Multiband front-end filtering:
- High Q moving filter in 470-960 MHz
- High Q moving filter in 960-1160 MHz (DME)
- Country specific saw filters: USA 940-960 MHz & Japan 1240-1260 MHz
Wideband and Narrowband DSP-FM operation (SW selectable):
- Narrowband allows more 50% band efficiency
- Narrowband allows about 3dB extra sensitivity and noise immunity
Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
High contrast OLED display
Automatic scan & transmitter programming through infrared
DSP based for extreme flexibility and multicompanding operations
Miniature design with integrated battery pack:
- rechargeable lithium pack
- 2 x AA batteries
Operation and charger (lithium) thru USB connector
Monitor & control through USB and Wisycom Manager 2.0 (computer SW):
- This transform MPR52 in a quick and low noise portable spectrum scanner!

MTP40S Transmitter:

New features:

Switchable Narrowband and Wideband operation
Ultrasound protection

Features:

New Lin-EAR Intermod free feature
New white OLED display (128 x 32 pixels)
Input dynamic extension with an integrated HW limiter (30 dB above peak)
Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
Miniature design with flexible pcb (no connectors) for extended reliability
Ultra-light metal alloy body (80g without batteries)
User selectable multi-companding systems:
ENR (noise optimised)
ENC (voice optimised)
Battery: 2 AA Alkaline, rechargeable NiMH or Lithium
Autonomy:
> 7h @ 100mW output power
> 10h @ 50mW output power
> 14h @ 10mW output power
Infrared interface for management and firmware update
Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
Extended regulation on Mic input gain: 85dB in 1dB step
Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
48V phantom power to use wired mic thru the PHA48 accessory

MTP41S Transmitter –

New features:

Switchable Narrowband and Wideband operation
Ultrasound protection

Features:

New Lin-EAR intermod free feature
Miniature design with flexible pcb (no connectors) for extended reliability
Input dynamic extension with an integrated HW limiter (30 dB above peak)
Ultra-light metal alloy body (60g without battery)
User selectable multi-companding systems:
ENR (noise optimised)
ENC (voice optimised)
Battery: 1 AA Alkaline or rechargeable NiMH or Lithium
Autonomy:
> 5h @ 50mW output power
> 7h @ 10mW output power
Infrared interface for management and firmware update
Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
Extended regulation on Mic input gain: 80dB in 1dB step
Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

The kit includes –

1 x MPR52 ENG B
2 x MTP40S or 2 xMTP41S
1 x MPRMNT
1 x TA5F to 2 XLRM cable
Wisycom VAP case

DELIVERY/RETURNS*

DELIVERY INFORMATION

All orders are delivered via next day tracked carrier. When placing an order please provide a suitable e-mail address and mobile number.

On despatch you will receive a notification from our carriers DPD along with updates right up to the point of delivery.

On the day of delivery you will get an accurate 1 hour time window for the items arrival.

You’ll even be able to contact your driver and track his progress!

Track your parcel here: DPD Tracking

DELIVERY RATES

We deliver Worldwide!

*Please note, FREE SHIPPING applies to Mainland UK addresses only.

Can’t see your country in the list below? Don’t worry, let us know and we’ll add it!

COUNTRY	DELIVERY COST EX VAT
UK Mainland (orders under £400 ex vat)	£6.66 – Next Day Courier
UK Mainland	£2.46 – Royal Mail 2-3 Days
UK Mainland Saturday Shipping	£13
Austria	£20
Belgium	£15
Bosnia	£65
Bulgaria	£35
Croatia	£30
Czech Republic	£25
Denmark	£20
Estonia	£30
Finland	£30
France	£15
Germany	£15
Greece	£35
Hungary	£30
Iceland	£65
Italy	£25
Jersey	£25
Latvia	£35
Lithuania	£35
Luxembourg	£15
Netherlands	£15
Norway	£65
Poland	£30
Portugal	£30
Republic of Ireland	£25
Romania	£35
Serbia	£65
Slovakia	£25
Slovenia	£25
Spain	£25
Sweden	£65
Switzerland	£50

RETURNS POLICY:

Not happy with your purchase?

Don’t worry, you can return goods ordered from us at any time within 14 working days of receipt for a full refund or for an exchange for a different product. Before returning any items, notify us so we know what to expect.
All we ask is that you return the items to us in the same condition that we supplied them to you. Please package the items up securely and safely so that they are not damaged during transit. Uuse the original delivery packaging where possible.

We strongly recommend using a recorded or tracked delivery service. Please send the return items to:
Returns, Raycom Ltd, Unit 8 Abbey Court Lane, Abbey Lane, Evesham, WR11 4BY

RETURNS TERMS AND CONDITIONS:

Returns of an order for a refund or an exchange:

Cost of return – The costs of returning goods to Raycom shall be borne by you, the customer, in all circumstances without exception, unless otherwise agreed upon with Raycom.
Loss & damage – Return items must be packed suitably and insured against the event of loss in transit. Raycom Ltd will not be responsible for lost or damaged returned goods. Lost or damaged goods may effect the level of refund on equipment.
Delivery costs – The original postage and packaging costs will not be refunded under any circumstances unless agreed with Raycom Ltd
Upon receipt of the goods, to Raycom Ltd, and with prior arrangement, we will give you a full refund of the amount paid or an exchange credit as required and agreed

The right to return goods to us will not apply in the following circumstances:

in the event that the product has been used, in any way, shape or form, other than limited useage when the goods are unpacked
in the case of software, audio or visual products, where the packaging has been unsealed, broken or is incomplete
to any products that we have made on special order and or customised specifically for you

The provisions of this clause do not affect your statutory rights. For more information, please see our Terms & Conditions, or should you have a question regarding this policy, please do get in touch.

CANCELLING AN ORDER:

In accordance with the distance selling regulations, any order with us can be cancelled before we have dispatched your items. In this instance we will refund you in full using the chosen payment method. Terms for our cancellation and returns policy.

If you wish to cancel your order:

Notify us by email sales@raycom.co.uk before we have dispatched the goods to you, or
where goods have already been dispatched to you, by returning goods to us in accordance with our returns policy

MPR52 Kit Technical Data

MPR52:

Frequency ranges	470 ÷ 800 MHz, 960 ÷ 1160 MHz (DME) and – 940 ÷ 960 MHz for B1 option or – 1240 ÷ 1260 MHz for B2 option or – 806 ÷ 810 MHz for B3 option
Switchable channels	2400 managed in 40 groups of 60 frequencies completely user customizable
Switching-window	Up 790 MHz
Frequencies	microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step; frequencies is easily PC reprogrammed with USB mini interface or optional UPK mini programmer
Frequency error	< ± 2.5 ppm, within the rated temperature range
Modulation	FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation	±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance	50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity	2 μV ( 6 dBμV), for SND/N > 58 dB; 5 μV (14 dBμV), for SND/N > 98 dB in the whole switching-window **
Amplitude response	< 0.5 dB (for RF input signal:6 dBμV ÷ 100 dBμV)
Co-channel rejection	> 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions	< 2 nW (typical = 0.1 pW)
Noise Reduction system	ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis + Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth	30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband)
Frequency response	± 1 dB in the 30 Hz ÷ 20 kHz range (wideband), ± 1 dB in the 30 Hz ÷ 15 kHz (narrowband)
Distortion	0.3 % typical
SND/D ratio (Analogue)	100 dB typical**
SND/D ratio (AES3)	> 125 dB typical
Audio output	Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable), impedance ≤ 200 ohm
Audio output level	MAX +18 dBu (peak deviation), adjustable in one dB step in a range of 54 dB
Digital output	AES3 @ 48 kHz
Monitor output	Stereo Plug 3.5mm(TRS) Locking (M6 x 0.5 thread)
Monitor output level	2 X 100mW @ 32 Ohm
Managing interface	mini USB
POWER LEDs	3 colors dedicate LED
Display	OLED 128×64 (white)
Front buttons	Simple operation with 4 buttons to quickly monitor and setup the receiver. One touch function for a frequency scan and sync function.
Powering	2 x IEC-LR6 1.5V size-AA alkaline or NiMh rechargeable – C3-V3 battery pack – KLIC 8000 or CR-V3R lithium (i.e. DR9708 duracell)
Battery life	– approx. 7 hours with MPRLBP Lithium-ion battery pack CS-KLIC8000 type – approx. 3.5 hours with 2x AA Alkaline batteries Energizer – approx. 4.5 hours with 2x AA NiMH 2.5Ah
Temperature range	-10 ÷ + 50 °C
Dimensions	91mm x 71.5mm x 27mm (HxWxD) with clip
Weight	100 g approx. without batteries
	*RMS value, A-weighted, 22 Hz / 22 KHz

MTP40S:

Frequency ranges	B7 option: 470 ÷ 663 MHz B3 option: 510 ÷ 698 MHz B2 option: 566 ÷ 798 MHz BP option: 806 ÷ 810 MHz B8 option: 940 ÷ 960 MHz B6 option: 960 ÷ 1160 MHz
Switchable channels	2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window	Up to 232 MHz, depending on band (see Variants below)
Frequencies	Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error	± 2.5 ppm, in the rated temperature range
RF Power	switchable typ. 20 mW/ 20L mW / 50 mW /100 mW note: in some countries high power can be disabled, for local norm!
Antenna connector	LEMO-F 1 pin
Modulation	wideband FM, with pre-emphasis (Narrowband on request)
Nominal deviation	±40 kHz Wideband (±25 kHz Narrowband option)
Peak deviation	±56 kHz Wideband (±35 kHz Narrowband option)
Spurious emissions	< 2 nW
Telemetry feature	TX transmits also a digitally modulated sub-carrier, suitable for: ▪ tone-squelch operating ▪ remote battery monitoring ▪ optional PTT (push to talk) operation
Noise Reduction system	ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth	45 Hz ÷ 21 KHz (3dB), 55 Hz ÷ 20 KHz (1dB) Wideband with LPF at 20KHz 45 Hz ÷ 17 KHz (3dB), 55 Hz ÷ 15 KHz (1dB) Narrowband with LPF at 15kHz
Distortion	< 0.3 % (0.15 % typ.)
SND/D ratio (Analogue)	typ. 115 dB (A)rms with 40 kHz deviation ▪ typ. 121 dB (A)rms with 56 kHz deviation Wideband typ. 115 dB (A)rms with 25 kHz deviation ▪ typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connector	LEMO or DPA, gain selectable -60 ÷ +40dB LEMO connector configurable on ‘mic’ display menu in 5 options: ▪ ’2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage ▪ ‘2 wires + bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply ▪ ‘3 wires: -54 dBu ÷ +26 dBu peak ▪ ‘2 wires & phantom’: -54 dBu ÷ +26 dBu peak ▪ ‘2 wires + bias & phantom’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply DPA connector (2 pin microdot audio connector) configurable only ▪ ‘2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage ▪ ‘2 wires+bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
Audio input level	from -54 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level	+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface	IrDA
LED	RGB led indication with (red, green and blue) on wireless power switch: ▪ Wireless transmission status: GREEN on/RED off ▪ Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%) ▪ Modulation peek (if activated & the limiter is disabled): RED ▪ Ptt status: RED if active ▪ Limiter into action: Blue
Battery lifetime indication	8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function	Pin 3 of the AF connector can be setup to an external push button
Display	High contrast OLED white display (128 x 32 pixels)
Power supply	2 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Power consumption	250mA@ 2.6V average (display off, 100mW power)
Battery life	with 2 AA alkaline ▪ approx. 14 hours @ 10mW ▪ approx. 10 hours @ 50mW ▪ approx. 7 hours @ 100mW ▪ approx. 6 hours @ 20mW Intermod Free “20L” level
Temperature range	-10 ÷ +55 °C
Dimensions	73,1mm x 64,5mm x 21,6mm (HxWxD) with clip
Weight	Approx. 85 g. without batteries (135g with batt.)

MTP41S:

Frequency ranges	B7 option: 470 ÷ 663 MHz B3 option: 510 ÷ 698 MHz B2 option: 566 ÷ 798 MHz BP option: 806 ÷ 810 MHz B8 option: 940 ÷ 960 MHz B6 option: 960 ÷ 1160 MHz
Switchable channels	2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window	Up to 232 MHz, depending on band (see Variants below)
Frequencies	Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error	± 2.5 ppm, in the rated temperature range
RF Power	switchable typ. 20 mW/ 20L mW / 50 mW note: in some countries high power can be disabled, for local norm!
Antenna connector	LEMO-F 1 pin
Modulation	wideband FM, with pre-emphasis (Narrowband on request)
Nominal deviation	±40 kHz Wideband (±25 kHz Narrowband option)
Peak deviation	±56 kHz Wideband (±35 kHz Narrowband option)
Spurious emissions	< 2 nW
Telemetry feature	TX transmits also a digitally modulated sub-carrier, suitable for: ▪ tone-squelch operating ▪ remote battery monitoring ▪ optional PTT (push to talk) operation
Noise Reduction system	ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth	45 Hz ÷ 21 KHz (3dB), 55 Hz ÷ 20 KHz (1dB) Wideband with LPF at 20KHz 45 Hz ÷ 17 KHz (3dB), 55 Hz ÷ 15 KHz (1dB) Narrowband with LPF at 15kHz
Distortion	< 0.3 % (0.15 % typ.)
SND/D ratio (Analogue)	45 Hz ÷ 21 KHz (3dB), 55 Hz ÷ 20 KHz (1dB) Wideband with LPF at 20KHz 45 Hz ÷ 17 KHz (3dB), 55 Hz ÷ 15 KHz (1dB) Narrowband with LPF at 15kHz
Audio input connector	LEMO or DPA, gain selectable -60 ÷ +40dB LEMO connector configurable on ‘mic’ display menu in 5 options: ▪ ’2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage ▪ ‘2 wires + bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply ▪ ‘3 wires: -54 dBu ÷ +26 dBu peak DPA connector (2 pin microdot audio connector) configurable only ▪ ‘2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage ▪ ‘2 wires+bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
Audio input level	from -54 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level	+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface	IrDA
LED	RGB led indication with (red, green and blue) on wireless power switch: ▪ Wireless transmission status: GREEN on/RED off ▪ Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%) ▪ Modulation peek (if activated & the limiter is disabled): RED ▪ Ptt status: RED if active ▪ Limiter into action: Blue
Battery lifetime indication	8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function	Pin 3 of the AF connector can be setup to an external push button
Display	High contrast OLED white display (128 x 32 pixels)
Power supply	1 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Battery life	▪ approx. 11 hours @ 50mW and @20mW Intermod Free “20L” level (with Lithium) ▪ approx. 8 hours @ 50mW (with rechargeable NiMH) ▪ approx. 4.5 hours @ 50mW (with Alkaline)
Temperature range	-10 ÷ +55 °C
Dimensions	58.2 x 64.5 x 21.7 mm (HxWxD) with clip
Weight	Approx. 80 g. without batteries (120g with batt.)