Discontinued – Lectrosonics SMDB/E01 Beltpack Transmitter
The Lectrosonics SMDB/E01 Beltpack Transmitter brings Digital Hybrid Wireless technology to miniature transmitters in a configuration essentially for any wireless microphone application with a lavaliere microphone. The tiny size of the single battery SMDB/E01 model makes concealment easy, yet with 50 mW output, it does not sacrifice performance.
The input section features the unique servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed before the A-D converter. The limiter has a range of more than 30 dB for excellent overload protection and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion. The limiter recovers quickly from brief transients, with no audible side effects, and also recovers slowly from sustained high levels to keep audio distortion low while preserving short term dynamics.
Features:
- Digital Hybrid Wireless Technology* (U.S. Patent #7,225,135)
- Power output: SMDB: 50mW
- Membrane switch control panel with LCD display
- 256 synthesized UHF frequencies
- Wide input dynamic range
- DSP based pilot-tone signal
- Circulator/Isolator output stage
- Splash-proof, machined aluminum housing
- Non-corrosive, super-hard finish
Switching power supplies throughout the design allow long battery life with NiMH batteries. Setup and control is simplified with membrane switches and an LCD interface. Multiple functions are clearly marked on the panel, with on-screen prompts on the LCD as reminders when another switch must be held or the selection is locked out.
The input section features the unique servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed before the A-D converter. The limiter has a range of more than 30 dB for excellent overload protection and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion. The limiter recovers quickly from brief transients, with no audible side effects, and also recovers slowly from sustained high levels to keep audio distortion low while preserving short term dynamics. Two bicolor LEDs make adjusting input levels for proper modulation easy and accurate.
The splash-proof housing is machined out of a single block of aluminum, which is then plated with a superhard, non-corrosive coating. The SMDB/E01 transmitter is equally at home in theatre, television and film where temperature and environmental extremes require superior performance under the most demanding conditions.
Included Accessories:
1 – Antenna
2 – AA Lithium Batteries
1 – Foam Insulating Pads (Part #35923)
1 – Pouch (Part #35697)
1 – Mic Connector Kit (Part #SMKITTA5)
1 – Belt Clip (Part #SMDBCSL)
1 – Quickstart Guide
