Lectrosonics DCHT and M2R Mega Bundle
The Lectrosonics DCHT and M2R Mega Bundle provides the mounting, cable and powering solutions to get going on any camera hop, mic’ing or AES signal requirement.
Comes with a Raycom extended 5 Year Warranty, for more information click here
Some engineers may require 2 Battery eliminators. You can find them here – LT Battery Eliminator
The following cables are available as options in the bundle:
- 2 x XLRF to TA6F DCHT Input Cable – Ideal for sending signals from a mixer/recorder
- 2 x TA3F to TA6F DCHT Input Cable – Ideal for sending signals from a mixer/recorder
- XLRF AES to TA6F DCHT Input Cable – Ideal for sending an AES signal from a mixer/recorder
- 2 x TA5M to TA6F DCHT Input Cable – Ideal for using two Lav mics with TA5F connectors on a presenter/talent
What’s in the bundle?
- 1 x Lectrosonics DCHT
- 1 x Lectrosonics M2R
- 1 x LR Hot Shoe Camera Mount
- 1 x LT Battery Eliminator (works with both DCHT and M2R)
- 1 x 3.5mm to 2 x XLRM M2R Output cable
- 1 x Cable from the drop down menu:
- 2 x XLRF to TA6F DCHT Input Cable
- 2 x TA3F to TA6F DCHT Input Cable
- XLRF AES to TA6F DCHT Input Cable
- 2 x TA5M to TA6F DCHT Input Cable
Lectrosonics DCHT TX
The Lectrosonics DCHT 2 Channel Digital Camera Hop Transmitter is designed for use in film and television production to provide a wireless link from a bag or cart system to cameras and recorders. The transmitter will accept mic or line level analog signals or AES digital signals from a mixer and transmit the signals to the receiver in a pure digital format.
The DCHT is compatible with the Lectrosonics M2R receiver. The digital architecture is a third generation design with specially developed, high efficiency digital circuitry for extended operating time on two AA batteries.
Features:
- Compatible with Duet M2R receiver
- Tunes across entire UHF frequency range
- TA6F top input connector
- 256-bit encryption – AES 256-CTR
- Selectable RF power at 10, 25 and 50 mW
- AES and analog mic and line level inputs
- USB port for firmware updates
- Wide range input gain adjustment
- DSP-controlled input limiter
- Two AA battery power
- Solid machined aluminium housing
- Optional powering from external DC
For more info on the DCHT see HERE
Lectrosonics M2R RX
Lectrosonics M2R IEM/IFB Receiver – The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image.
Features:
- IEM (Wireless Monitor) receiver with digital RF
- 24-bit digital audio
- IR (infrared) port for fast setup
- High resolution, color LCD
- Stereo or mono operation
- Low latency of 1.4 ms with analog inputs
For more info on the M2R, click HERE
