DPA CORE 6060 With Termination Options
The DPA CORE 6060 With Termination Options is just three millimetres in diameter – two millimetres smaller than DPA’s existing 4000 series of miniature microphones. Despite its unobtrusive size, it’s exceptionally clear, consistent and highly durable.
If you select a connector from the list, we will hard wire (terminate) the connector by snipping off the Micro Dot and solder on the newly selected connector. This is done in house with industry standard connectors.
Micro Dot adapter options:
If you wish to use the Micro Dot connection with DPA DAD Adapters:
- Sennheiser 3.5mm to Micro Dot DAD Adapter
- Lectrosonics TA5F to Micro Dot DAD Adapter
- Wisycom 3-Pin LEMO to Micro Dot DAD Adapter
- Amazingly tiny 3mm capsules
- CORE by DPA technology
- Renowned DPA sound
DPA have taken their new ‘CORE by DPA’ technology that reduces distortion and increases dynamic range and shrunk it down to fit into the DPA 6060’s 3mm (.12 in) subminiature mic capsule, meaning you don’t have to compromise on sound to focus on the size and aesthetics.
The DPA d:screet™ 6060 (normal SPL) is an omnidirectional microphone that carries a frequency range of 20 Hz – 20 kHz and has a noise floor of only 24 dB(A). It’s well suited for capturing speech and can also be used to close mic a wide range of instruments.
This subminiature mic outperforms all other mics in their class with a lower noise floor than any other 3 mm capsule on the market.
Stainless steel construction makes the mics in the 6000 series extremely durable. They can tolerate high temperatures and they’re resilient against impacts and resistant to abrasion. The subminiature mics use the same size cable as on DPA’s 5 mm mics. The cables are extremely durable, do not become entangled and withstand rough pulls.
The d:screet™ 6060 is available in black, beige, brown and white colour options.