CTP Systems DIO816AES AES to DANTE Converter
The CTP Systems DIO816AES AES to DANTE Converter is a simple way to get your AES audio into and out of the Dante or AES67 network. The unit has eight stereo AES inputs and eight stereo AES outputs with remote webpage level control. The unit includes a secondary port for Dante Redundancy or switch output. Both ports include network activity LEDs. Level and operational adjustments may be made using the DIO816AES web page.
With the issue 2 firmware, it can handle 48kHz and 96kHz mixed sample rates on the AES inputs, AES output sample rates may be adjusted to 48kHz or 96kHz in blocks of four (1-4 and 5-8) and a 48kHz or 96kHz network sample rate.
- Sample rate: 48kHz and 96kHz (switchable in blocks of four)
- 8 Stereo AES inputs
- 8 Stereo AES Outputs
- Secondary port for Dante Redundancy or a switch output
- Dimensions: 1RU, 200mm deep excluding connectors
- Power: 110-240 VAC 50/60Hz (Power supply switches automatically based on power input)
Accessing the DIO816AES web page
The Dante web page may be accessed using the Dante assigned IP address of the DIO816AES. If you are using a fixed IP address then you already know what the IP address is. If you are using DHCP the address may be found using Dante Controller and selecting Device Info. Dial this address into your web browser and the webpage will appear.
If your network is suitably set up it is also possible to access the web page using the following:
Where dantename is the name that appears for the DIO816AES in Dante Controller.
Dante controller software is available Here