Ambient UMPII Universal Mic Power The Ambient UMPII Universal Mic Power was consequently designed for using Phantom or T-powered microphones on a “wireless boom” with typical belt pack transmitters. This saves your transmitter batteries being run down quickly by using a standard PH48 converter. The case is very light and
Compatible with Wisycom MTP30 & MTP40S
Slots in to the battery caddy
Power input: 9-18V DC feeding (internal switching regulation)
Hirose-4pin power connector
Wisycom Battery Eliminator For The MTP41 & MTP41S Wisycom Battery Eliminator For The MTP41 & MTP41S, slots in to the battery caddy of the MTP41/41s and provides a separate Hirose power cable. Power input: 5-20V DC feeding (internal switching regulation) Max Load : 400 milliamps ADT41H: with Hirose-4pin power connector
Wisycom Power Adapter For MPR30 and MPR52 Wisycom Power Adapter For MPR30 and MPR52. Power input: 9-18V DC feeding (internal switching regulation). ADTMPR with Hirose-4pin power connector Compatible with: MPR30-ENG, MPR30-IEM, MPR30-IFB
Lectrosonics LR Receiver Battery Eliminator – LRBATELIM Lectrosonics LR Receiver Battery Eliminator – LRBATELIM. This battery eliminator replaces the batteries and door on the LR Receiver, allowing the unit to be powered from an external DC source. The battery eliminator is supplied in a kit including mounting screws.
Lectrosonics LT Transmitter Battery Eliminator – LTBATELIM Lectrosonics LT Transmitter Battery Eliminator – LTBATELIM. This battery eliminator replaces the batteries and door on the LT transmitter, allowing the unit to be powered from an external DC source. The battery eliminator is supplied in a kit including mounting screws.
Allows external powering of all SM Series transmitters with 6 to 36 volt DC
Fits in place of standard battery door on single and dual battery models
Locking power connector
Protected against shorts and reverse polarity
