Use to apply DC power to remotely power Antennas or inline amplifiers
LED to show DC power is present
Cased in High Strength PETG plastic
Dimensions: 550W x 500L x 200D
Available as Single or Twin Pack
Raycom Custom SMA to BNC Cable The Raycom Custom SMA to BNC Cable to connect RF devices with SMA connections to RF devices with BNC connections. Hand made using high quality SMA, BNC connectors and cable. We offer options of Straight SMA & Right Angled SMA connectors. If we don’t
Raycom Li-ion Rechargeable Battery for Wisycom MPR Receivers The Raycom Li-ion Rechargeable Battery for Wisycom MPR Receivers is suitable for the Wisycom MPR50 and MPR52 Receivers. These can be charged via the micro USB port on the MPR52 RX. Features: 3.7AH 1600 mAh Li-ion
Lenovo V130 15.6" Full HD Laptop, Windows 10 Home, Bluetooth, DVD±RW
Complete with working install of Wisycom Manager
Complete with working install of Wisycom TX Manager
Intel Core i5-7200U 2.5 GHz Processor , 4GB RAM, 128GB SSD
Zaxcom Receiver Hirose Power Cable 40cm The Zaxcom Receiver Hirose Power Cable 40cm is hand made using the Switchcraft 671K locking jack power connector. This will work with any QRX and RX Zaxcom Receiver.
Zaxcom Transmitter Hirose Power Cable 40cm The Zaxcom Transmitter Hirose Power Cable 40cm is handmade using Switchcraft 670K locking jack connectors. This power cable will work with the Zaxcom TRXCL3.
Raycom Custom Lectrosonics DCHT 2 x TA3F to TA6F Cable The Raycom Custom Lectrosonics DCHT 2 x TA3F to TA6F Cable takes Line level signals from two TA3 outputs to the Lectrosonics DCHT for transmission. Features – Input – 2 x TA3F Output (to DCHT) – TA6F Length – 40cm
Raycom Custom 2 x TA5M to TA6F DCHT Cable The Raycom Custom 2 x TA5M to TA6F DCHT Cable sends mic and line level signals from microphones and other audio devices configured with TA5F connectors to the Lectrosonics DCHT. Features: Length – 15cm Input – 2 x TA5M Output (To
Raycom Custom Lectrosonics DCHT 2 x XLRF to TA6F Cable The Raycom Custom Lectrosonics DCHT 2 x XLRF to TA6F Cable Cable connects two line level signals from 2 x XLR 3-Pin to the Lectrosonics DCHT for transmission. We use high quality connectors and cable. Features: Input – 2 x
Raycom Custom AES3 to TA6F DCHT Cable The Raycom Custom AES3 to TA6F DCHT Cable takes AES3 digital signal from an XLR output to the Lectrosonics DCHT for transmission. Features: Input -XLR-F 3Pin AES3 Output (to DCHT) – TA6F Length – 40cm Digital Signal
Raycom Custom TA6F To Pig Tails DCHT Cable The Raycom Custom TA6F To Pig Tails DCHT Cable is a general purpose cable with TA6F 6-pin female on one end and stripped and tinned wires on the other end with two separate cables. Wired for connection to microphone level signals. Features:
Raycom Custom Tentacle 3.5mm to TA3F Cable The Raycom Custom Tentacle 3.5mm to TA3F Cable connecting your Tentacle to a Sound Devices 552 or any other device with TA3 inputs. Features: Direction: Bidirectional Right-angle 3.5mm mini jack (3-pin) Neutrik REAN TA3 connector Length: 40cm For all our Tentacle products, click
Rode SoundField 10Pin XLR Extension Cable 2M The Raycom Custom Rode SoundField 10Pin XLR Extension Cable 2M is a hand made cable using the highest quality cables and connectors.
